Differences

This shows you the differences between two versions of the page.

--- vmware:esxi5:cli [2024/09/27 14:23] – js
+++ vmware:esxi5:cli [2024/09/27 14:40] (current) – js
@@ Line 1: / Line 1: @@
 ====== ESXi 5.x CLI ======
-===== List Versions =====
+For a complete list of all esxcli command enter:
-<code bash>escli system version get</code>
+<code bash>esxcli esxcli command list</code>
+[[https://www.virten.net/wp-content/uploads/2014/12/esxcli-550-command-reference.txt|List of cli commands from virten.net.]]
+\\
+\\
+\\
+\\
+\\
+\\
+Examples:
+==== List Versions ====
+<code bash>esxcli system version get</code>
-===== List all Datastores =====
-<code bash> </code>
+==== Get Hostname ====
+<code bash>esxcli system hostname get </code>
-===== Register existing VM =====
+==== List IP Interfaces ====
+<code bash>esxcli network ip interface ipv4 get</code>
+==== List all Datastores ====
+<code bash>esxcli storage filesystem list</code>
+or
+<code bash>esxcli storage vmfs extent list</code>
+==== Register existing VM ====
 <code bash>vim-cmd solo/registervm /vmfs/volumes/xxxxxxx/vmname/vmname.vmx</code>
-===== List all VMs =====
+==== List all VMs ====
 <code bash>vim-cmd vmsvc/getallvms</code>
+or
+<code bash>esxcli vm process list</code>
-===== Power On VM =====
+==== Power On VM ====
 <code bash>vim-cmd vmsvc/power.on <id></code>
-===== Get Power Status =====
+==== Get Power Status ====
 <code bash>vim-cmd vmsvc/power.getstate <id></code>
-===== Get DNS Servers =====
+==== Get DNS Servers ====
 <code bash>esxcli network ip dns server list</code>
+==== List IPMI Devices ====
+<code bash>esxcli hardware ipmi sdr list</code>
-<code bash> </code>

Differences

Page Tools